Welded Hydraulic Cylinders

Product Description

Holding rich expertise in this domain, we are known amongst the cardinal manufacturers and exporters of Welded Hydraulic Cylinders. These hydraulic cylinders has been manufactured in compliance with industrial standards using excellent quality materials. Owing to their intricate features such as rust proof finish, excellent durability and weather resistance, our hydraulic cylinders are popular in the market. Our Welded Hydraulic Cylinders is perfect for heavy duty material handling equipments.

Features and specifications  of Welded Hydraulic Cylinders : 

STANDARD & NON STANDARD cylinders, range From 25 mm bore and up to 350 mm bore with the stroke length from 10 mm and up to 5000 mm. Working pressure 500 kg/ cm2

Type of Mounting

Front & Rear Trunion / flange mounting / foot mountings Clevis mounting / double female clevis mounting at rear end & intermediately function mounting.

Seals

Hallate & Parker Seals.

Honed Tube

All the tubes are micro honed for superior surface finish with Ra value less than 0.3

Piston Rod

En - 8 to En - 353 are ground and hard chrome plated with 25 microns minimum plating thickness

Specifications

	Maximum Stroke		The maximum distance the shaft travels from fully retracted to fully extended.
	Search Logic:		User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
	Operating Pressure		Full required range of operating pressure.
	Search Logic:		User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
	Bore Size		Specify desired bore if unlisted above.
	Search Logic:		User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
	Shaft Diameter		Diameter of shafting; largest diameter if there are different diameters.
	Search Logic:		User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.

Cylinder Configuration

	Your choices are...
	Simple Configuration		A simple cylinder configuration consists of a single rod that can only travel the length of its rod and back.
	Telescopic Configuration		A telescopic configuration cylinder uses "telescoping" cylindrical housings to extend the length of the cylinder. Telescopic configuration cylinders are used in a variety of applications that require the use of a long cylinder in a space-constrained environment.
	Cylinder - Rodless		Rodless cylinders are linear devices that use pressurized fluid to move a load within many power transfer operations.
	Cable Cylinder		Cylinder has cables emerging from end(s) through a gland seal. The cable then passes up around a pulley and connects with the moving element, whose other end is attached to the cable from the opposite cylinder end.
	Magnetically Coupled		Magnetically coupled cylinders maintain an enclosed cylinder; stage is moved by magnetic field coupling with the moving cylinder flange.  Design prevents contaminant entry into cylinder.
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.

Cylinder Action

	Your choices are...
	Single Action		A single action cylinder is pressurized for motion in only one direction. A spring is frequently used to bring the cylinder piston back to the original position.
	Double Action		A double action cylinder can move along the horizontal (x-axis) plane, the vertical (y-axis) plane or along any other plane of motion. Both sides of cylinder piston can be pressurized for reversible motion.  Force ratings can differ somewhat in opposite directions.
	Other		Other unlisted, specialized, or proprietary cylinder actions.
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.

Features

	Your choices are...
	Adjustable Stroke		End points or total stroke length can be adjusted.
	Bumpers / Cushions		Cushions or bumpers for softening impact at ends of stroke.
	Closed Loop Control		This is sometimes called servo control. The cylinder has external devices that feedback a signal to the pump control giving it position information. A type of configuration is to use a servo / proportional valve on the cylinder.
	Double End Rod		Rod extends out of both ends of cylinder with attachment features such as threads on both ends.
	Holding Brake		Works in conjunction with the self-locking feature to increase holding force.
	Integrated Overload Slip Clutch / Torque Limiter		A device used to allow for slip when torque exceeds overload limits.
	Integral Flow Control		Integral flow control incorporates a flow control valve or device that limits the amount of air or fluid that enters the cylinder.
	Integral Sensor		Cylinder is equipped with an integral sensor to monitor position and/or proximity.
	Intrinsically Safe		The cylinder can be used in hazardous environments.
	Magnetic Switch		Magnetic switch (Hall effect sensor, reed switch) indicates whether thruster position is in retracted or extended position.
	Multi-position		Endplate can be actuated to different positions along its stroke, not just the endpoints.
	Non-rotating		Multiple rods or key feature to prevent the plunger from rotating.
	Protective Boot		Covers that protect moving parts against environmental damage.
	Self-locking		When there is a loss of signal, the device will lock to its current position.
	Shock Absorbers		Pneumatic or hydraulic fluid absorption of shock.
	Thermal Overload Protection		Motor has a thermal switch which trips when a preset temperature is exceeded.
	Water Resistant (Sealed)		Rated to resist moisture which could cause corrosion.
	Other		Other unlisted, specialized, or proprietary
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.

Body Material

	Your choices are...
	Aluminium		A bluish silver-white malleable ductile light trivalent metallic element that has good electrical and thermal conductivity, high reflectivity, and resistance to oxidation.
	Steel		A commercial iron that contains carbon in any amount up to about 1.7 percent as an essential alloying constituent. It is malleable when under suitable conditions, and is distinguished from cast iron by its malleability and lower carbon content.
	Stainless Steel		Stainless steel is chemical and corrosion resistant and can have relatively high pressure ratings.
	Plastic		Any of numerous organic, synthetic, or processed materials that are mostly thermoplastic or thermosetting polymers of high molecular weight and that can be made into objects, films, or filaments.
	Other		Any plate material not listed above.
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.

Cylinder Mounting

	Mounting Options
	Your choices are...
	None		A cylinder that has no designated method for mounting.
	Clevis or Eye		Cylinder is equipped with a clevis or eye attachment, which connects to the extended end of cylinder piston via threads.
	Double-end Mount		Nose and rear contain threaded bosses for nut attachment.
	Flange		Cylinder is equipped with a mounting flange or bracket.
	Floating Mount Bracket		Cylinder is equipped with a floating bracket for more convenient installation.
	Foot		Cylinder is equipped with a foot mounting bracket. A foot bracket is a type of flange, which rests underneath the cylinder.
	Lug		Lugs are short blocks attached to the side of the cylinder that have holes used to allow mounting to another surface.
	Face Mount		Threaded holes on front face for attachment.
	Nose Mount		Nose is threaded for mounting through hole with nut on other side.
	Rear Mount		Rear has tapped holes or mounting flange.
	Threaded		Cylinder is designed to mount to bolts via threaded holes in the cylinder head or cap.
	Trunnion		Cylinder is equipped with a trunnion mount. A trunnion is a specially designed mounting block, and can be located at the cap, head, or intermediate location.
	Other		Other unlisted, specialized, or proprietary mountings.
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
	NFPA Mounting?		Mounting geometry conforms to standards of the National Fluid Power Association (NFPA). Several standard configurations fall under the NFPA designation.
	Search Logic:		"Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
	Mount Location:
	Your choices are...
	Cap		Mount is located at the cap, also referred to as base or rear, of the cylinder.
	Head		Mount is located at the head, also referred to as front or face, of the cylinder.
	Intermediate		Mount is located at the intermediate area, or center of the cylinder.
	Other		Other unlisted, specialized, or proprietary mounting locations.
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.

Cylinder Style

	Your choices are...
	Tie-rod		A cylinder that uses one or more tie-rods to provide additional stability. Tie-rods are typically installed on the outside diameter of the cylinder housing. In many applications, the cylinder tie-rod bears the majority of the applied load.
	Smooth Body		Cylinder body encases piston.
	Pancake		Shorter length and larger diameter than other styles.
	Miniature		A cylinder that operates in the same manner as a regular sized cylinder except its profile is smaller and the body may be threaded for mounting purposes.
	Multiple Bore		Two or more bores and pistons combined or stacked in same cylinder.
	Ram		A ram is a device in which the cross-sectional area of the piston rod is more than one-half the cross-sectional area of the moving component. Rams are primarily used to push rather than pull, and are most commonly used in high pressure applications.
	Rectangular		Cylinder encased in a rectangular "box" shape frame.
	Rotating		Air or hydraulic powered rotating cylinders that are well-suited to handle a wide range of high performance chucking applications.
	Welded		A smooth hydraulic cylinder that uses a heavy-duty welded cylinder housing to provide stability.
	Other		Other unlisted, specialized, or proprietary cylinder styles.
	Search Logic:		All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.